19 Nov 2026, Thu

Japan’s Automakers Are Writing One Spec for Steel, Plastic and Wiring. Using It Will Be Optional.

Entrance to Toyota’s Motomachi plant in Toyota City, Japan
Get The Auto Wire in your inbox
Driving news, policy watch and the auto industry’s biggest moves. Free, no spam.

The Japan Automobile Manufacturers Association said on Nov. 19 that its members will unify the standards for some of the steel, resin and wiring harnesses that go into their vehicles, a cost-cutting move aimed at foreign rivals that include the Chinese brands at the center of the car-ban bill racing a lame-duck deadline in Congress.

None of the three items is something a buyer picks from a brochure. The money is in what surrounds them: the test procedures, acceptance criteria and part variations each automaker has stacked on top of national standards that already exist. If JAMA’s plan works, a supplier that builds the same connector for Toyota, Honda and Nissan stops proving it three different ways. Whether it works depends on a choice the association can’t make for anyone. Japanese antitrust guidance treats a trade group’s standard as voluntary, so each of JAMA’s 14 member companies decides for itself whether to use it.

What JAMA announced on Nov. 19

Kyodo News, reporting from the association’s press conference in Tokyo, said the targets are steel, resin and the wire harness, the bundled cabling that carries power and signals through a car, and that the companies will cooperate across corporate lines to cut costs. A JAMA official told reporters the industry needs an effort its survival depends on. A day earlier, Kyodo reported that the plan covers the types and specifications of some steel and resin, that it is meant to lower costs and shorten development time so automakers can move investment into the next-generation vehicles where American and Chinese companies are ahead, and that JAMA is considering widening the effort with the auto parts makers’ trade group.

JAMA streamed the briefing on its English-language channel, and the recording runs about an hour and a half. When I checked its press-conference archive, the association had not yet posted a written summary or slides. The exact steel grades, the resins involved and a date for the first common specification are not in any primary document I could find, so I am not reporting them.

JAMA has been working toward this since March. At JAMA’s March 19 press conference, Chairman Koji Sato, who is Toyota’s vice chairman and chief industry officer according to the association’s current officer list, said maintaining the international competitiveness of Japan’s auto industry is the aim of its New Seven Priority Challenges. Honda’s Toshihiro Mibe, a JAMA vice chairman, said at the same event that the industry cannot stay competitive without speed and that the structure that puts automakers above their suppliers has to change. In June, Mibe told Toyota Times only that discussions on parts and materials standardization were under way. Five months later there are three named targets.

Public wiring standards exist, and each automaker adds its own

Japan already has a published standard for car wire. The Society of Automotive Engineers of Japan’s JASO D625-3:2020 covers low-voltage copper automotive cable rated for 30 volts AC and 60 volts DC, and it was built by merging an older product standard, JASO D611:2014, with a test standard, JASO D618:2013. The cost lives one layer up, in each automaker’s own requirements for the same wire, connector or plastic part.

JAMA and the Japan Auto Parts Industries Association laid out that problem in a July 14 media briefing on their joint Smart Standard Activity, a program for trimming quality and performance criteria that go past what customers need. Their slides say each automaker keeps separate criteria, so a supplier has to meet several standards for the same part. One example was the appearance standard for wire-harness connectors: the rule was vague enough that a connector with a black speck got thrown away, even when nothing was wrong with how it worked. Clarifying the rule cut both scrap and inspection.

Multi-pin wiring harness connectors plugged into an under-seat fuse block
Wiring harness connectors plugged into a fuse and junction block under a car’s front seat. Photo: Ahsanriaz6157 via Wikimedia Commons (CC BY-SA 4.0)

Toyota started the program at the end of 2017. By the companies’ count, it handled about 7,500 cases from 2018 through 2025 and adopted roughly two-thirds of them. Suppliers still told Toyota that the benefit of Toyota acting alone was small, according to the same slides. That complaint is the business case for an industry standard. If one automaker loosens a spec, the supplier still runs the stricter version for the other customers, on the same line, with the same inspectors. The savings only show up when the second and third versions go away.

The groups have spent the year building the machinery to do that. The joint working group includes all 14 JAMA automakers. A session at Mazda’s headquarters on July 2 drew 48 companies, 12 of them automakers and 36 suppliers, and 222 people, who looked at physical parts and ruled on supplier proposals in the room. A first industry guideline for appearance standards came out in April, sorting surfaces into zones from S, very noticeable, to D, not visible in normal use. Each automaker still writes its own quality standard; the guideline gives them a shared way to decide how strict that standard should be.

Recycled-plastic rules explain why resin is on the list

Resin is the target with a regulatory clock attached. Japan’s revised Act on the Promotion of Effective Utilization of Resources took effect April 1, 2026, and the Ministry of Economy, Trade and Industry named recycled plastic as the first material whose use certain manufacturers must plan for and report. Cars are on the list. METI’s designation documents set the threshold for automakers at 10,000 vehicles.

The European Union has set numbers. The end-of-life vehicles regulation that the European Parliament adopted on June 18 requires the plastic in each new vehicle type to contain at least 15% recycled material within six years and 25% within ten, with at least 20% of the recycled share coming from scrapped vehicles. Japanese automakers launching new vehicle types in Europe will have to hit those levels.

JAMA has already started on the plastic most used in cars. In an April 17 presentation to a Cabinet Office expert panel, its recycling committee said polypropylene is the most common automotive plastic and published representative property targets for recycled PP: two general-purpose grades and three reinforced grades, for parts such as door trim, bumpers, instrument panels and underbody covers, each with at least 25% post-consumer content by weight. The targets cover the range common to all the automakers, with room for each company to tune. The same presentation put recycled plastic recovered from dismantling and shredding at about 21,000 metric tons a year, with a goal of doubling it.

With roughly 21,000 tons to go around, recycled PP is scarce, and it varies from batch to batch. If every automaker qualifies it to its own criteria, a recycler with a limited supply has to pass a separate set of tests for each customer, and a batch that fails one company’s test may be stuck even if another company would have taken it. A common grade lets one qualified batch go to any member. The same logic applies, with lower stakes, to steel: fewer grades and one set of evaluation criteria mean larger orders per grade for the mills.

Shared parts can mean shared recalls

Fewer part variations also means more vehicles depend on each one. The Takata airbag recalls show what a defect in a widely shared component does. NHTSA’s 2017 report on the state of the Takata recalls counted 19 vehicle manufacturers and about 46 million inflators in an estimated 34 million vehicles in the U.S. alone, and the campaign is still producing filings, including Toyota’s recall of 314,000 vehicles over Takata inflators this week. A common harness component from one specification would carry the same exposure. The flip side is that a single fix and a single parts supply would cover every affected brand.

The other constraint is legal. The Japan Fair Trade Commission’s guidelines for trade associations generally allow voluntary standards that serve customers’ interests, but they warn against forcing members to comply and say using a standard should be left to each company. JAMA’s quality program already runs inside those lines. Its July slides say the group discusses only non-competitive areas such as appearance, does not discuss purchase prices, future technology or procurement strategy, contract terms or production volumes, and had its approach reviewed by a lawyer. Expect the steel, resin and harness work to follow the same rules, which also means no member is obliged to sign on.

Harness parts, prices and a 2028 logistics deadline

The first item is which harness parts become common. Kyodo’s report names the wire harness as a target without saying which pieces of it are covered. If connectors and terminals are included, a repair shop could eventually stock one pigtail that fits more than one brand. That is a possibility to track, not a promise anyone has made.

The second is the price. Kyodo’s account frames the savings as money for development of next-generation vehicles, not as a lower sticker price, and nothing JAMA has said suggests the next Corolla or Civic gets cheaper because its steel grade has a shared name.

The third is speed, which is the measure JAMA set for itself. Its parallel effort to standardize how finished vehicles are tied down on car-hauling trailers, so any company’s cars can ride on the same trucks, has a target of the end of 2028, Mibe said in June. A common resin or steel specification will tell you more if it shows up with a date and a list of the automakers using it.

If your Honda and your neighbor’s Toyota ended up sharing the same wiring connectors, would you count that as a win at the parts counter or a reason to worry about the next multi-brand recall?

By Johnny Lloyd

Johnny covers what happens to cars and drivers after the sale: theft rings, speed and plate-reader cameras, dealer fees and title fights, data breaches and app tracking, and the lawsuits and police records behind crashes, takeovers, and fires. He reports on what the records show, not what the press release says.

Join the conversation

No comments yet — be the first to share your take.

Your email address will not be published. Required fields are marked *